Complete shallow bowl 190mm gloss black headlight unit.

Fits Le Mans 1 headlamp cowling FAA99575. Supplied complete with bulb and three short wires (without connectors). NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems. Neutral beam pattern and not E Marked

 This part is due back in stock soon, call 01484 841395 to reserve yours

Brand new right hand original "Lego" type switchgear and twistgrip with switches for starter and run/kill.
Previously unavailable new and ideal for your restoration project.

Comes with attached 4 pin molex connector, molex pins and rubber boot, ready to be plugged into your standard loom. Twistgrip for standard dual throttle cables.

See ELA17061 and ELA14055 for left hand switches.

 Sorry, this part is no longer available.

Phase sensor for Motoplat ignition

Connector contains two female bullet type connectors. Also known as Guzzi ref. 27722235 ignition pickup plate

 This part is due back in stock soon, call 01484 841395 to reserve yours

 29722270 GU29722270 29 72 22 70
 2972 2270 2972.2270 29.72.22.70

Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.

 1 in stock

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Complete shallow bowl 193mm satin black LED headlight unit. Bright, neutral beam pattern will pass an MOT and illuminates the road much better than a halogen unit. Classic looks suit models from the Le Mans 1 to the V9

Fits Le Mans 1 headlamp cowling FAA99575. Also perfect for custom builds, cafe racers and specials. NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems. Neutral beam pattern and not E Marked.
Tried and tested on our bikes at Gutsibits

 This part is available by special order, request a quote

Combined regulator rectifier to replace separate items on Bosch equipped models. See our wiring instructions page for help installing this reg/rec.

Includes harness extension with 6 spade connector block. NB this reg/rec should not be used with a lithium-ion battery

 Availability varies on this part, check availability

Combined regulator rectifier to replace separate items on Bosch equipped models. See our wiring instructions page for help installing this reg/rec.

Supplied with long leads for battery and alternator connection. Female spades for alternator and charge sensing, ring connectors for battery. NB this reg/rec should not be used with a lithium-ion battery

 This part is due back in stock soon, call 01484 841395 to reserve yours

Motoplat ignition unit for one cylinder (2 required per bike)

Also known as Guzzi ref. 23721493, 27721435, 23721491, 23721490, 27721435

 This part is available by special order, request a quote

 23721494 GU23721494 23 72 14 94
 2372 1494 2372.1494 23.72.14.94

Alternator stator for Bosch charging systems, this does not include the plate and brush holders

To fit this you will need to solder in the three wires from the windings. Replacement rotors and brushes also available. See ELA00503 for a complete higher output upgrade for your charging system

 This part is available by special order, request a quote

 17712400 GU17712400 17 71 24 00
 1771 2400 1771.2400 17.71.24.00

Reconditioned starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. See ELA14738 for replacement solenoid.

This may fit Loop frame models with 5 speed gearboxes, you will need to trim a clearance into the battery tray to make room. The clutch cable bracket will prevent fitment on 4 speed models.

This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address. NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts. Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place

 2 in stock

 14730554 GU14730554 14 73 05 54
 1473 0554 1473.0554 14.73.05.54